Thursday, November 21, 2024

The Best Ways to Maintain Your Water Purifier

The Best Ways to Maintain Your Water Purifier

Best Ways to Clean and Maintain Your Water Purifier

Most homes will have different water filtration systems to ensure people can safely use water for anything. But if you were to focus on drinking water, the best way to clean it is through water purifiers. While you may already have a water purifier at home, you should know how to properly take care of it.

Maintaining the water purifier is critical if you do not want to spend money on replacing it multiple times whenever it gets damaged. You can find high-quality water purifiers like the Berkey Water Filter, which can provide you with safe drinking water all the time. But even if you have the best water purifier, you should still maintain it to ensure it does its job well.

Replacing the RO Filters Regularly

Suppose you do not know what RO Filters are. In that case, they are a special type of filtration that utilizes a semi-permeable, fine membrane with tiny pores that lets water pass through while eliminating large molecules that you would not typically want in your drinking water. These molecules are usually salts, bacteria, and harmful contaminants.

After using your water purifier, you should replace the filters as the contaminants will build-up in the filter and prevent the water from getting cleaned efficiently. Replacing these filters is critical during the water filtration process. You should also know how the process works to get a clearer picture of how your water purifier works.

  • Initial Phase – The first part of the water filtering process is a filter cartridge that eliminates sand and different sediments. This initial process is done to prevent the RO (Reverse Osmosis) membrane from getting damaged. You should also replace the pre-filters of the water purifier after 6 to 9 months of continuous use.
  • Secondary Phase – The second part of the filtering process is a carbon filter removing chlorine and other contaminants that will cause the water to smell bad. This phase is critical for those who want to remove any distinct taste of water. The carbon filter also helps prevent the RO filters from getting damaged as small bits of chlorine can still pass through. When replacing the pre-filters, you should include the carbon filters as well.
  • Tertiary Phase – This is the last part of the water filtering process. The reverse osmosis stage eliminates and drains the residual deposits from the membrane. While the other two need to be replaced within 6 to 9 months, you need to replace the thin membrane after 2 to 3 years of continuous use. In some instances, you may have to replace the thin membrane earlier than 2 to 3 years, depending on your water supply’s condition.

Cleaning and Sanitizing the Water Purifier

Aside from replacing the RO filters, you need to pair it up with proper cleaning and sanitization. Take note that there are sanitation kits you can buy to ensure you clean out your water purifier as efficiently as possible. Doing the cleaning on your own can save you a lot of money rather than hiring a professional to do it.

You can also refer to your water purifier’s manual to figure out how to properly do the maintenance and cleaning. It is highly advised that you always refer to the manual that came along with the purifier because it will tell you everything you need to know about it, including how to clean it the correct way. Doing so will prevent you from damaging the water purifier and save you the hassle of replacing it.

Most of the time, users who have ample experience can clean it themselves because of how easy it can disassemble, clean, and assemble the water purifier back. It will usually take you an hour or less than that, depending on how large the water purifier is. You should always use sanitation kits specific to your water purifier to ensure it gets cleaned properly.

Cleaning the Water Purifier’s Exterior

Apart from cleaning the inside, you should not forget to clean the outside part of the water purifier. The exterior of your water purifier is constantly exposed to different contaminants like dust, dirt, and other bacterias within the room, and they will stick to the surface. Over time, they will make their way down to the water tap and go into your glass when you pour water into it.

To prevent that, you can simply wipe the exterior surface with a clean, wet cloth mixed with soap to efficiently collect the residue bits. A properly cleaned water purifier can last with you for years, helping you save a great amount of money in the long run.

When choosing your water purifier, make sure you choose a high-quality water purifier like the Berkey Water Filter. These are just one of the many water purifiers to choose from to provide clean drinking water for everyone.